Windows on 1st floor:
A split window frame was fitted on the first-floor windows. At the top is a tilt and turn window that can be opened for ventilation and at the bottom a fixed-glass window.
Ground floor windows:
61 mm-thick, bullet-proof double glazing was installed on the ground-floor windows (Class BR2/S according to Standard EN 1063:2001, Category P4A according to Standard EN 356:2001), made up of Criblind 255 / 20 mm cavity / interior Crisunid 68/4, with sanded edges and low emissivity treatment, minimum light transmission of 50%, sun factor between 40% and heat transmission U = 1.4W/m2K.\nThe seal between the glass with structural silicone and a 6 x 6 cm square section stainless steel profile measuring 6 mm in thickness to guarantee BR2/S.
On the ground floor, the interior cladding is separated from the windows using an “L”-shaped AISI 304 stainless steel profile measuring 6 mm in thickness to guarantee the BR2/S of the glass.