Soldevila produced the carpentry and woodwork for this work designed by the architectural team of Víctor Rahola and Jorge Vidal at Sa Plana des Cepellar in Ibiza, implemented by the construction company URCOISA.
Outer carpentry made of iroko laminated in three layers.
Fittings by the company GU, aluminium handle by Hoppe, Paris model.
Wood finish with water-based varnish by Becker – Acroma to 300 microns/m2 in three coats (primer, base and finish).
Double glazing formed by 6 + 6 mm outer glazing, 12 mm air cavity and 5 mm inner glazing. The outer glazing is low emissions and with solar control.
83 cm wide door leaf, 210 cm in height and 7 cm in thickness, with panels of solid iroko on both sides measuring 13 cm in width and 1.8 cm in thickness, which are connected using the tongue and groove system (male-female). The grain runs vertically.
7 cm thick solid iroko side pillar (the same as the leaf).
Varnished on the inside and the outside in the same colour and with the same characteristics as the windows.
3-point security lock by TESA.
4 chrome-plated stainless steel security bolts by AMIG (without height adjustment).
Interior “L”-shaped stainless steel handle by JNF with circular metal trim.
Exterior stainless steel 65 mm diameter doorknob by JNF.
Chrome-finish brass spyhole with wide angle of vision.
Hidden interior windbreak at the bottom of the door leaf by AMIG.
7 cm thick door leaf with panels of solid iroko on both sides measuring 13 cm in width and 1.8 cm in thickness, which are connected using the tongue and groove system (male-female). The grain runs vertically.
Entryway doors with hidden hinges by Simonswerk, Tectus 340 model, adjustable 3D.
Sliding doors with Klein Slid 125 retractile sliding guide.
Interior and exterior cladding:
Interior cladding made of panels of solid iroko measuring 13 cm in width and 1.8 cm in thickness, the interior cladding with natural matt texture varnish by Grupo GANI ref. Legno and the exterior cladding with a water-based varnish the same as the finish of the windows.